LHM Plus Brake Fluid stands as a top-quality mineral oil-based fluid meticulously crafted to meet the ISO 7308 standard. It is tailored for use in various automotive applications, including hydraulic, suspension, power steering, and braking systems.


  • Provides exceptional anti-wear and anti-corrosion protection.
  • Demonstrates outstanding anti-foam properties.
  • Effectively prevents the formation and deposition of sediment and sludge.
  • Compatible with the majority of elastomers utilized in automotive hydraulic systems.
  • Boasts an impressively high viscosity index, ensuring the maintenance of viscosity characteristics over the oil’s lifespan.
  • Exhibits remarkable shear stability over extended periods.
  • Possesses a very low pour point and maintains good flow characteristics at extreme temperatures.
  • Operational temperature range spans from -40°C to 110°C.
  • Shows low hygroscopic tendencies, resisting moisture absorption.


  • DO NOT mix with DOT 3, DOT 4, DOT 5 or DOT 5.1 brake fluids.
  • Do not use in vehicles specifying vegetable oils, synthetic fluid or conventional brake fluid.


  • Wherever the manufacturer calls for a mineral oil based LHM or LHM Plus fluid.
  • Hydraulic steering, hydraulic levelling system and brake booster system of PSA vehicles.
  • Suspension systems in vehicles that require mineral brake fluid such as Jaguar, Rolls Royce and some agricultural equipment.
  • Motorcycles requiring a fork oil between 5 and 10.


LHM Plus Brake Fluid meets or exceeds the following demanding performance levels: ISO:                                  7308

PSA:                                 B71 2710 (Peugeot, Citroen)

Ford:                                 ESN-M6C59-A

Massey Ferguson:           MF 1151 Volkswagen:                    VW 2000


Always consult your vehicle owner’s manual for the manufacturer‘s recommendations. Keep fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in systems failure or costly repairs. Store fluid only in its original container. Keep container clean and tightly closed to prevent absorption of moisture. For best results drain and replace the fluid once a year. Flush and refill system with fresh LHM Plus Hydraulic Fluid. Bleed the hydraulic system as recommended by the manufacturer. Check and replace damaged seals and dust protectors if required.

PropertyMethodTypical Results
Physical formLiquid
ColourVisualGreen-yellow fluorescent liquid
Density@ 20°C, g/mlASTM D-40520.84
Viscosity cSt @ -40°CASTM D-4451068
@ 40°CASTM D-44519.1
@ 100°CASTM D-4456.4
Viscosity IndexASTM D-2270335
Flash point, °CASTM D-92124
Pour point, °CISO 3016-124 max

Available in:          Bulk, 205 Litres, 20 Litres and 1 Litre.

Item code:             VI8-3141

Product Informations

Product Data Sheet

Material Safety Data Sheet