PRODUCT DESCRIPTION

Radiator Treatment is a concentrated, heavy-duty, and long-lasting organic corrosion inhibitor designed for use in automotive and stationary engine cooling systems. It is suitable for a wide range of engines, including those powered by petrol, diesel, and natural gas, where anti-freeze/anti-boil protection is not required.

Radiator Treatment offers extended-term corrosion protection for both aluminum and ferrous alloys and is fully compatible with the rubber hoses and plastics commonly found in engine cooling systems.

Notably, Radiator Treatment does not contain ethylene glycol and is not an anti-freeze/anti-boil coolant. Therefore, it should only be used in accordance with the recommendations provided by engine manufacturers. It is not intended to address pre-existing corrosion issues.

APPLICATION

Dose Radiator Treatment at 40-50ml per litre of distilled water. If required, top up with diluted Radiator Treatment to avoid a rundown in concentration.

Radiator Treatment exhibits the following performance:

  • Suitable for heavy-duty truck engines, offering a service life of up to 1,000,000 km, or up to 12,000 hours or 6 years (whichever occurs first) when used with high-quality water.
  • For machinery and commercial engines, provides extended protection for up to 12,000 hours or 6 years (whichever comes first) when combined with good quality water.
  • For light commercial and passenger vehicles, it is recommended to drain and replace at 200,000 km or 5 years, whichever comes first.
  • Contains a distinctive inhibitor package tailored for comprehensive mixed-metal protection.
  • Ensures optimal safeguarding of all metals commonly employed in cooling systems.
  • Demonstrates exceptional resistance against cavitation and liner pitting.
  • Formulated without silicates to maximize the longevity of water pump operation.
  • Environmentally friendly and biodegradable, aligning with eco-conscious practices.
  • Meets or exceeds various performance and specification requirements, ensuring reliable performance in accordance with industry standards:

o ASTM D-1121, D-1881, D-1384, D-1287, D-4340, D-2809, D-2570 and D-3634.

DIRECTIONS FOR USE

When the vehicle engine is cool, drain the cooling system (including the heater) as per the vehicle owner’s handbook. Thoroughly flush and rinse the cooling system. Reconnect all hoses, drain plugs, etc; then fill the cooling system with the correct volume of water (as per the vehicle owner’s handbook), and add the appropriate dosage of Radiator Treatment.

Check the level of the Radiator Treatment and top up after running the engine to operating temperature and allowing it to cool again.

PROPERTIES

Appearance Pale green

Odour Slight

Specific Gravity (kg/l) Typically 1.05 – 1.07

pH 9.3 – 9.5

Flashpoint Non Flammable

Available in: 200 Litres and 20 Litres

Item code: VI8-3400

Order / Information Form