PRODUCT DESCRIPTION
Gear Oil 75W/90 GL-4 represents an API GL-4 gear lubricant that comes highly recommended for use in synchronized manual transmissions, front-wheel drive transaxles, gearboxes, and automotive hypoid and spiral bevel axles that operate under low to moderate loads. This specialized product boasts a low viscosity formula meticulously crafted to address two crucial concerns: preventing shift baulking during cold temperatures and reducing excessive noise during high-temperature operation.
Gear Oil 75W/90 GL-4 is specifically designed to provide very much improved:
- Oil seal life
- Durability (gear surface life)
- Corrosion protection to yellow metals under both wet and dry conditions
Specially designed oxidation-resistant paraffinic base oils are blended with high-performance extreme-pressure additives to create Gear Oil 75W/90 GL-4, guaranteeing extended durability for transmission drive lines. This formulation possesses remarkable “cling-on” characteristics that effectively reduce transmission drive line noise in various scenarios, such as low-speed high-torque, high-speed low-torque, and shock loading conditions.
The inclusion of Foam Inhibitors in Gear Oil 75W/90 GL-4 prevents the formation of foam within transmissions. Foam is undesirable because it hinders efficient gear lubrication, leading to premature wear and tear.
SPECIFICATIONS
Gear Oil 75W/90 GL-4 meets or exceeds the following demanding performance requirements: API: GL-4
Gear Oil 75W/90 GL-4 is suitable for service fill of GMH, Ford, Daihatsu, Mazda, Mitsubishi, Nissan, Toyota and all other transmissions requiring an API GL-4 (SAE 75W/90) gear lubricant.
Always consult your vehicle owner’s manual for the manufacturer’s lubricant recommendations.
TYPICAL PROPERTIES
Property Results
SAE 75W/90
Density (kg/Lt) @ 15oC 0.854
Viscosity (cSt) @ 40oC 95.5
@ 100oC 15.0
Viscosity Index 165
Pour Point (oC) -38
Copper Strip Corrosion –
3 hours @ 100oC 1b
Flash Point; COC (oC) <205 Foam Formation (after settling)
Sequence I, II, III Nil
Timken OK Load (kg) 24
Phosphorus (% Mass) 0.010
Boron (ppm) <5
Sulphur (% wt)* 0.39
*Excludes sulphur due to base oil.
Available In: Bulk, 1000 Litres, 200 Litres, 60 Litres, 20 Litres, 4 Litres and 1 Litre
Item Code: VI4-2425
