PRODUCT DESCRIPTION

Brake Fluid Dot 5 represents a top-notch silicone-based brake fluid intended for use in all hydraulic brake and clutch systems equipped with drum or disc brakes, excluding those utilizing LHM fluids. In contrast to DOT 3 and DOT 4 brake fluids, DOT 5 stands out for being non-hygroscopic, offering superior thermal stability, and featuring higher dry and wet boiling points. This specially formulated brake fluid contains rust and chloride corrosion inhibitors, ensuring excellent protection. With a dry boiling point exceeding 260°C and a wet boiling point surpassing 180°C, it meets the highest performance standards.

BENEFITS

  • In full compliance with FMVSS 116 DOT 5 and SAE J 1705 standards.
  • Goes above and beyond all standard DOT 5 specifications.
  • Boasts an elevated boiling point, effectively eradicating brake fade for exceptional performance.
  • Remains impervious to atmospheric water absorption, ensuring a prolonged service life without reducing the boiling point.
  • Non-corrosive and non-toxic, prioritizing safety and longevity.
  • Flows seamlessly in both hot and cold conditions, effectively lubricating moving components and extending service life.

COMPATIBILITIES

  • With all seal materials normally used in brake systems (i.e. SBR, EP, Neoprene etc).
  • Not harmful to paintwork and other materials.
  • DO NOT mix Brake Fluid DOT 5 with DOT 3, DOT 4 and DOT 5.1 brake fluids.

APPLICATIONS

  • Wherever DOT 5 fluid is specified.
  • Superior brake performance in racing applications.

METHOD OF APPLICATION

Always consult your vehicle owner’s manual for the manufacturer‘s recommendations. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs. Store brake fluid only in its original container. Keep container clean and tightly closed to prevent contamination. For best results, drain and replace the brake fluid once a year. Flush and refill system with fresh Silicone DOT 5 Brake Fluid. Bleed the hydraulic system as recommended by the manufacturer. Check and replace damaged seals and dust protectors if needed.

TYPICAL PROPERTIES
PropertySpecificationTypical Results
Appearance of liquidPurple liquidPurple liquid
Density @ 20 oC, (g/cm3)0.945 – 0.9650.955
Boiling Point (ERBP), (oC)260 Min>300
Wet Boiling Point, (oC)180 Min>220
Viscosity @ -40 oC, (cSt)900 Max150
@ 100 oC, (cSt)1.5 Min13.9
Fluid Stability – High Temperature, (oC)± 3 Max0.0

Available in: Bulk, 20 Litres, 4 Litres and 500 mL

Item code: VI8-3047

Order / Information Form