PRODUCT DESCRIPTION
Bio-Hydraulic Oils S Type are hydraulic lubricants that are not only effective but also environmentally conscious. They are composed of biodegradable components, including synthetic fatty esters, stabilizers, anti-wear additives, corrosion inhibitors, and foam inhibitors. These oils meet the stringent biodegradability standards outlined in OECD 301B and adhere to HEES requirements.
What sets Bio-Hydraulic Oils S Type apart is their complete absence of mineral lubricating oils. Instead, they rely on high-quality synthetic fatty esters derived from Turkish harvested vegetable oils. Compared to mineral oil-based lubricants, these bio-hydraulic oils are significantly more biodegradable, less hazardous, and well-suited for use in environmentally sensitive areas. They pose a lower risk of harm to soil, waterways, and other environmental components.
Bio-Hydraulic Oils S Type offer exceptional viscosity-temperature characteristics, owing to the naturally high viscosity indices of the vegetable oil-based synthetic esters. They are specially formulated to excel in high-exposure or high-temperature applications. The optimal operating temperature range for these oils spans from -10°C to 100°C, making them versatile and reliable across a range of conditions.
Compared with mineral oil based lubricants Bio-Hydraulic Oils S Type are:
- Enhanced Safety for Users and the Environment
- Increased Biodegradability for Eco-friendliness
- Reduced Toxicity – Free from Heavy Metals
- Improved Performance Characteristics
- Enhanced Viscosity Stability at Elevated Operating Temperatures Thanks to a Higher Viscosity Index
- Enhanced Lubricity Leading to Lower Equipment Operating Temperatures
Bio-Hydraulic Oils S Type were developed to meet and exceed the current requirements of the agricultural, forestry, heavy engineering, construction and marine equipment industries.
Bio-Hydraulic Oils S Type can be used in mobile or stationary equipment such as forklifts, cranes, tractors, graders, bulldozers, hoists, marine equipment, mining equipment, ski lifts, etc. and is particularly suited to use in environmentally sensitive areas such as:
- National or State parks
- Near or on waterways
- Recreational areas
- Road, rail and tramways
- Local Government Maintenance Vehicles
- Water, Electricity, Telecommunication and Gas Service providers etc.
Bio-Hydraulic Oils S Type are fully miscible and compatible with mineral oils therefore changing to
Bio-Hydraulic Oils S Type is simple as no prior system flushing is required.
Bio-Hydraulic Oils S Type contain ester components that may be incompatible with certain elastomers used as seals, hoses or other components in the customer’s equipment. Prior to full scale commercial use, it is recommended that compatibility with system components is determined by the customer.
Elastomer Compatibility
| ISO 1629 | ||||
| DESCRIPTION | S* | MD* | D* | |
| NBR | Medium to high nitrile rubber (Buna N,>30% acrylonitrile) | C | C | C |
| FPM | Fluoroelastomer (Viton®) | C | C | C |
| CR | Neoprene | S | S | S |
| IIR | Butyl rubber | S | N | N |
| EPDM | Ethylene propylene rubber | N | N | N |
| PU | Polyurethane | C | C | C |
| PTFE | Teflon® | C | C | C |
**(S- Static, MD- Mild Dynamic, D- Dynamic)
C = Compatible
S = Satisfactory for short term use, but replacement with a completelycompatible elastomer is recommended at the earliest convenience. N = Not Compatible
Avoid contamination with water. Where possible drying equipment should be used and water drained after any shut-down period.
Vesta suggests that the equipment manufacturers’ recommendations for viscosity grade, performance requirements and general operating conditions should be checked prior to use.
TYPICAL PROPERTIES
| Property | Unit | Test Method | Typical Results | |
| ISO Viscosity | 46 | 68 | ||
| Code VI5- | 2916 | 2921 | ||
| Appearance | – | Visual | Yellow to amber fluid | |
| Density @ 15°C | kg/L | ASTM D1298 | 0.92 | 0.92 |
| Kinematic Viscosity @ 0°C | mm2/s | ASTM D445 | 320 | 554 |
| Kinematic Viscosity @ 20°C | mm2/s | ASTM D445 | 109 | 135 |
| Kinematic Viscosity @ 40°C | mm2/s | ASTM D445 | 47.5 | 68 |
| Kinematic Viscosity @ 100°C | mm2/s | ASTM D445 | 9.5 | 12.5 |
| Viscosity Index | – | ASTM D2270 | 190 | 185 |
| Pour Point | °C | ASTM D97 | <-30 | <-30 |
| Flash Point Open Cup | °C | ASTM D92 | 300 | 304 |
| Fire Point | °C | ASTM D92 | 360 | 360 |
| Air Release | ASTM D3427 | 7 min | 7 min | |
| Corrosiveness to Copper | – | ASTM D130 | 1a | 1a |
| Rust Preventing Characteristics | – | ASTM D665 | Pass | Pass |
| Acid Number | mg KOH/g | ASTM D974 | 2 | 2 |
| Foam Test @ 25°C | ml-ml | ASTM D892 | 50-0 | 50-0 |
| Dry TOST | hrs | ASTM D943 mod. | 800 | 800 |
| Fire Point | °C | ASTM D92 | 360 | 360 |
| Pump Test | ASTM D2882 | <5 mg wear | <5 mg wear | |
| Gear Lubrication | DIN 51354-2 | >12 FZG load stage | >12 FZG load stage | |
| Water Separability | ml-ml-ml | ASTM D1401 | 41-39-0 (30) min | 42-38-0 (30) min |
Available in: 200 Litres, and 20 Litres
Item Code: VI5-2916 (46), VI5-2921 (68)
