Synplus LL-FE 0W/30 is an advanced, fully synthetic engine oil featuring mid SAPS (Sulfated Ash, Phosphorous, and Sulfur) content, meticulously crafted for extended drain intervals and super high performance. It harnesses the latest advancements in oil formulation and additive technology to deliver the utmost engine protection, with a particular focus on vehicles equipped with smaller engines that are susceptible to Low-Speed Pre-Ignition (LSPI).

This oil is especially well-suited for use in modern BMW turbo petrol engines that do not require particulate filters but necessitate BMW LL-01 FE performance. Additionally, it is an excellent choice for various car and light van diesel engines featuring catalytic converter exhaust systems, designed to take advantage of low-viscosity oil with a high-temperature/high-shear rate (HTHS) viscosity ranging from 2.9 to 3.5 mPa-s.

In today’s environmentally conscious automotive market, where reducing emissions and enhancing fuel efficiency are paramount, new engine designs have emerged, necessitating higher-quality lubricants. Smaller, higher-output engines, developed to meet stringent fuel economy standards, pose specific challenges to lubricants:

• Increased Heat: Smaller engines generate elevated temperatures, accelerating the rates of oil oxidation, nitration, and deposit formation. This degradation of the oil promotes the formation of acidic compounds and leads to increased viscosity.

• Increased Pressure and Speed: These engines operate at higher pressures and speeds, making it more challenging for the oil to maintain a lubricating film that prevents metal-on-metal contact. This accelerated wear predominantly affects components like the valve train.

• Emission Control: Many contemporary petrol engines come equipped with catalytic converters to reduce emissions of CO, NOx, and unburned carbon. However, catalytic converters are sensitive to SAPS (Sulfated Ash, Phosphorous, and Sulfur) found in engine oil detergents, antiwear additives, and base oils.

Synplus LL-FE 0W/30 is expertly designed to address these specific demands and challenges, delivering exceptional protection and performance for engines, promoting environmental compliance, and ensuring extended engine life.


• Extended oil change intervals

• Improved fuel efficiency

• Prolonged lifespan for catalytic exhaust systems

• Enhanced protection against Low-Speed Pre-Ignition (LSPI)

• Sustained performance of Diesel Particulate Filters (DPF) and Three-Way Catalytic (TWC) filter systems


Synplus LL-FE 0W/30 meets or exceeds the following demanding performance requirements: API:                                  SP, SN Plus

ACEA:                              A5/B5, A7/B7

BMW Longlife:                 LL-01 FE

Mercedes Benz:               229.6

Renault:                           RN0700

Always consult your vehicle owner’s manual for the manufacturer’s lubricant recommendations.

Density (kg/Lt) @15oC0.848
Viscosity (cSt) @100oC9.7
CCS @ -30oC (cP)3407
Viscosity Index186
HTHS (mPa.s)3.1
TBN (mg KOH/g)12.3
Sulphated Ash (% wt)1.0
Phosphorus (% wt)0.08
Flash Point (oC)230

Available in:         Bulk, 200 Litres and 20 Litres

Item code:            VI1-2155

Product Informations

Product Data Sheet

Material Safety Data Sheet